Ident	Name			Description					Manufacturer	rs-component's code

R1	4K7 0805		4,7K 5% smd resistor
R2	10K 0805		10K 5% smd resistor
R3	10K 0805		10K 5% smd resistor
R4	10K 0805		10K 5% smd resistor
R5	10K r-network		8+1 pin resistive network
R6	56 0805			56 ohm 5% smd resistor
R7	100 0805		100 ohm 5% smd resistor

C1	4,7uF 1206		4,7uF smd ceramic or tantalum, 6 - 16V		Murata		367-3421
C2	4,7uF 1206		4,7uF smd ceramic or tantalum, 6 - 16V		Murata		367-3421
C3	4,7uF 1206		4,7uF smd ceramic or tantalum, 6 - 16V		Murata		367-3421
C4	0.1uF 0603		0.1uF smd 16V					Murata		220-7922
C5	0.1uF 0603		0.1uF smd 16V					Murata		220-7922
C6	0.1uF 0603		0.1uF smd 16V					Murata		220-7922
C7	4,7uF 1206		4,7uF smd ceramic or tantalum, 16V		Murata		367-3421

IC1	XC9572XLVQ44-10C	72 Macrocell CPLD, 3.3V, VQ44 package		Xilinx
IC2	Z80-Cpu socket		pair of 20-pin female strips
IC3	Z80-Cpu socket		pair of male strips, 12.5mm, 0.5mm diam
IC4	NCP1117-DT33		3.3V linear regulator, DPAK			ON-Semi		516-5865

TR1	BC856B			Generic PNP transistor, sot23					445-2045
TR2	BC856B			Generic PNP transistor, sot23					445-2045

CN1	FLS007-6001-2		MMC smd slot					Yamaichi 	493-2030
CN2	SIL 6			6 pin male strip (JTAG programming)
CN3	SIL 6			6 pin male strip (kempston joystick)
CN4	SIL 4			4 pin male strip (RS-232 port)

LED1				red smd led
LED2				yellow smd led

PCB				two layers FR4 1,6mm 51x57mm pcb

NOTE: if leds are not going to be installed, then the following components can be dropped too:

R6, R7, TR1, TR2.